1. Start by holding the knife in one hand and the disk in the other. Insert the knife into the center hole. DO NOT try to insert the knife while the disk is down next to the photo.

2. Check to see that the blade is coming out from the bottom of the disk.

3. While holding the knife and the disk together, place the disk next to the photo so the photo rests within the groove.

4. Keep the knife straight up and down, holding it close to the bottom. Use a steady, firm grip. Glide the disk along the edge of the photo. It is easier to pull the knife toward you than to push it away. When coming to a corner, hold the knife and disk still, then turn the project with your other hand.

5. You can always insert a pen or pencil (instead of a knife) to draw a line around the photo and then cut with scissors or a paper trimmer. The new grooved design will prevent the disk from slipping onto the photo while you are tracing.

Use recommended supplies (such as glass cutting surface, swivel knife, and a sharp blade.) Works with Coluzzle knife, but DOES NOT work with Coluzzle mat. PRACTICE, PRACTICE, PRACTICE!